Tripp-Lite B300-9X2-4K Manuel De L'utilisateur page 15

Operation
Description: Enable the function.
o off
Description: Disable the function.
- CEC Status Command
cec on | off
Function: Enable or disable Consumer Electronics Control.
Parameters:
o on
Description: Enable the function.
o off
Description: Disable the function.
- Mute Command
mute on | off
Function: Mute the audio output.
Parameters:
o on
Description: Mute the audio.
o off
Description: Unmute the audio.
- Baud Rate Command
baud 9600 | 19200 | 38400 | 115200
Function: Set the baud rate to the specified value.
- Standby Mode Command
standby on | off
Function: Enable or disable standby mode.
Parameters:
o on
Description: Enable the function.
o off
Description: Disable the function.
- Restoring Default Command
reset
Function: Restore system settings to default.
- Firmware Upgrade Command
Upgrade
Function: Enable firmware upgrade mode.
15