Operation Panel - Sharp AR-122E Mode D'emploi

OPERATION PANEL

Exposure mode selector key and
1
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.15)
Light and dark keys and indicators
2
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level is
shown by a lit indicator. (p.15) Use to start
and terminate user program setting. (p.19)
Alarm indicators
3
Developer replacement required
indicator (p.31)
Misfeed indicator (p.28)
Toner cartridge replacement
required indicator (p.21)
Maintenance indicator (p.31)
Copy ratio selector key and
4
indicators
Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p.17)
Copy ratio display (%) key (p.17)
5
Display
6
Displays the specified copy quantity,
zoom copy ratio, user program code,
and error code.
SCANNER key and indicator
7
(p.45, p.52)
Can be used when the Printer/Scanner
Expansion Kit (AL-12PKM) is installed.
ONLINE key and indicator (p.45)
8
Can be used when the Printer/Scanner
Expansion Kit (AL-12PKM) is installed.
6
Power save indicator
9
Lights up when the unit is in a power
save mode. (p.18, p.19)
Paper feed location indicators
10
Light up to show the selected paper
feed station.
ZOOM keys and indicator
11
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (p.17)
Copy quantity keys
12
• Use to select the desired copy
quantity (1 to 99). (p.15)
• Use to make user program entries.
(p.19)
Clear key
13
• Press to clear the display, or press
during a copy run to terminate
copying. (p.15)
• Press and hold down during standby
to display the total number of copies
made to date. (p.20)
Start key and indicator
14
• Copying is possible when the
indicator is on.
• Press to start copying.
• Use to set a user program. (p.19)