Displaying Total Number Of Copies - Sharp AR-122E Mode D'emploi

Program
No.
1
2
3
5
6
* Factory default settings are indicated with an asterisk (*).
5
Press the start (
will be steadily lit and the entered value will be stored.
6
Press the light (
copy mode.

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
1
Press the clear (
2
Press and hold down the clear (
seconds. The total number of copies will appear in two steps,
each with three digits.
Example: Total number of copies is 1,234.
20
Mode
Auto clear time
Preheat mode
Auto power shut- off
timer
Auto power shut- off
mode
Resolution of AUTO
& MANUAL mode
) key. The right-hand number in the display
To change the setting or to set another mode, press the clear
( ) key. The unit will return to step 2.
) or dark (
) key to reset the display to zero.
Parameters
0 OFF, 1 10sec., 2
*3 60sec., 4 90sec., 5
*0 30sec., 1 60sec., 2
0 2min., *1 5min., 2
3 30min., 4 60 min., 5
0 OFF, *1 ON
*0 300dpi, 1 600dpi
) key to return to the normal
) key for approximately 5
30sec.
120sec.
90sec.
15min.,
120min.