Speaker Connection; Using Other Subwoofer; Connecting A Tv, Etc - Pioneer X-HM70-S Mode D'emploi

Connecting your equipment

Speaker connection

• The provided speaker wire with the red tube is for the plus
(+) terminal. Connect the wire with red tube to the plus
(+) terminal, and other wire to the minus (
• Use speakers with an impedance of 4 ohms as lower
impedance speakers can damage the unit.
CAUTION
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
• Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the
unit.
• Do not let the bare speaker wires touch each other.
• Make sure that all the bare speaker wire is twisted
together and inserted fully into the speaker terminal. If
any of the bare speaker wire touches the back panel, it
may cause the power to cut off as a safety measure.
If not using the provided speaker wire
Bare wire connections
1 Twist exposed wire strands together.
2 Loosen terminal and insert exposed wire.
3 Tighten terminal.
1 2
10 mm
X-HM70 only:
• Do not install your speakers overhead on the ceiling or
wall. The grill is designed to be detachable, and as such it
may fall and cause damage or personal injury if installed
overhead.
• Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
• Do not stand or sit on the speakers. You may be injured.

Using other subwoofer

You can connect a subwoofer with an amplifier to the
) terminal.
–
SUBWOOFER PREOUT socket.
Audio cable
(commercially
available)
Audio signal
Main unit
ANTENNA
VIDEO LINE SUBWOOFER
L
R
OUT IN PREOUT
Note
• No sound is heard from the subwoofer without a built-in
amplifier.
3
To audio input
socket
To SUBWOOFER
PREOUT socket
SPEAKERS
Commercially
AM
available subwoofer
LOOP
(amplifier built in)
FM
UNBAL
75 Ω
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V 0.6 A MAX)
LAN (10/100)

Connecting a TV, etc.

Connect to the TV using an audio cable.
TV
Audio cable
(commercially
available)
To LINE
input
Main unit sockets
VIDEO
OUT
To select Line In function:
• On main unit: Press INPUT button repeatedly until Line In
is displayed.
• On remote control: Press LINE button.
To audio
output sockets
SPEAKERS
ANTENNA
AM
LINE SUBWOOFER
LOOP
L
FM
UNBAL
75 Ω
R
IN PREOUT
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V 0.6 A MAX)
LAN
9
En