SSS Siedle SELM 611-01 Manuel De Mise En Service page 8

LED displays and their meaning
Red LED lights continuously.
Red LED lights continuously but goes
out after 15 seconds. Then the green
LED lights up continuously.
Red LED lights continuously.
When passing an EK/EKC 601‑...
in front, the green LED flashes for
1 second.
Red LED lights continuously.
When passing an EK/EKC 601‑...
in front, the red LED goes out, the
green LED lights continuously.
Green LED lights continuously.
Green LED lights continuously.
When passing an EK/EKC 601‑...
in front, the green LED flashes for
3 seconds.
Green LED lights continuously.
When passing an EK/EKC 601‑... in
front, the red LED flashes for 3 sec‑
onds.
Green LED lights continuously.
When passing an EK/EKC 601‑... in
front, the green LED goes out, the
red LED lights up.
Green and red LEDs light up alter‑
nately for 10 seconds,
then the green LED lights continu‑
ously.
Green and red LEDs light up alter‑
nately for 10 seconds,
then the red LED lights continuously.
8
The master card has not been read
in, the ELM is still in its default
status.
The ELM was in the programming
mode and switched after automatic
timeout to the operating mode.
The ELM is in the programming
mode. The green LED EK confirms
read‑in of a EK/EKC 601‑...
With the master card, you have
switched the ELM over to the oper‑
ating status.
ELM is in operating status.
ELM is in operating status.
The user key EK 601‑.../the user
card EKC 601‑... is executing the
required function.
ELM is in operating status.
The user key EK 601‑.../the user
card EKC 601‑... has not been read
in. (no control entitlement).
You have switched the ELM into
the programming mode with the
master card.
After a cut in the power supply, the
ELM has returned to the operating
status.
After a cut in the power supply, the
ELM has returned to the default
status.