Lubrication; Replacement Parts - Franklin Electric Inline 1100 Manuel Du Propriétaire

mAintenAnce

LuBriCATiON

The pump requires only water for lubrication and must never be run dry.
WA R N I N G
is turned off. After reassembling the pump, refer to priming instructions before running.
before servicing unit.
DrAiNiNg
NOTiCe: Disconnecting the pump will not necessarily drain all other parts of the piping system.
Hazardous voltage.
If there are any concerns with the proper procedure or necessity of draining the suction
Can shock, burn, or
plumbing, contact a water systems professional.
cause death.
All piping and water tanks exposed to freezing weather should be drained. If there are any
Ground pump before
concerns with the proper procedure to drain the system's pressure tank, contact the tank
connecting to power
manufacturer for assistance.
supply. Disconnect
power before working
on pump, motor
or tank.

rePLACeMeNT PArTS

14D
(6 Places)
6D
(6 Places)
7D
(6 Places)
1A
5D
6D
7D
2A
(2 Places)
4C
7D
6D
13D
7D
6D
13D
W A R N I N G
Before disconnecting pump, be sure fuse box leads are disconnected or power
W A R N I N G
Hazardous voltage can shock, burn or cause death. Disconnect power to pump
8D
3B
6D
13D
6D
13D
9D
10D
(2 Places)
11D
12D
4C
6D
7D
16F
Pressure Pressure Shut-off
Sensor
Sensor Optional
15A,E
17G
19
18H
7