Special Product Features - LaserLiner PowerCross-Laser 8 G Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Calibration
The measuring device must be calibrated and tested on a regular basis to ensure it is
accurate and working properly. We recommend carrying out calibration once a year.
Contact your distributor or the UMAREX-LASERLINER service department.

Special product features

Electronic vials and positioning motors controlled by temperaturestable
sensors for automatic alignment of devices. The device is brought into initial position and
aligns itself autonomously.
This function is automatically enabled when the sensor auto-matic is
switched on. This easily enables the horizontal or vertical levelling at a required hight,
for instance in connection with a crank tripod or wall mount. Also, the laser can be
used on vibrating surfaces and in windy conditions.
Transport LOCK: The device is protected by a special motor brake during
transport.
Devices with the PowerGreen+ technology have very bright, green
high-performance diodes which provide outstanding visibility of the laser lines at great
distances, on dark surfaces and in bright ambient lighting conditions.
GRX-READY technology enables line lasers to be used even in unfavourable
light conditions.The laser lines pulsate at a high frequency and this can be picked up by
special laser receiversover long distances.
Approx. 6 times brighter than a typical red laser with 630 - 660 nm
Number and direction of the lasers
H = horizontal laser / V = vertical laser /
D = downpoint / S = Slopefunction
16
EN
4H 4V 1D
S

Publicité

Table des Matières
loading

Table des Matières