Data Transfer; Application (App) - LaserLiner PowerCross-Laser 8 G Manuel D'utilisation

Data transfer

This device has digital connectivity which allows wireless data transfer to mobile devices
such as smart phones or tablets with a wireless interface.
The system prerequisites for a digital connection are specified at
http://laserliner.com/info?an=ble
This device can generate a wireless connection to devices which are compatible with the
wireless standard IEEE 802.15.4. The wireless standard IEEE 802.15.4 is a transfer protocol
for Wireless Personal Area Networks (WPAN). The range is set to a maximum distance of
10 m from the terminal device and greatly depends on the ambient conditions such as
the thickness and composition of walls, sources of interference as well as the transmit /
receive properties of the terminal device.
The digital connection is activated as soon as the device is switched on as the wireless
system is designed to use very little electricity. A mobile device can link up to the active
measuring device via an app.

Application (app)

An app is required to use the digital connection You can download the app from the
corresponding stores for the specific type of terminal device:
!
Make sure that the wireless interface of the mobile device is activated.
After starting the app and activating the digital connection, a connection can be set
up between a mobile device and the measuring device. If the app detects several active
measuring devices, select the matching device. This measuring device can be connected
automatically the next time it is switched on.
Additional functions via the app
The app offers a range of additional functions. If it is not possible to control your device
via the app for technical reasons, reset the device to the factory settings by switching
it off and back on again so that you can continue to use the regular functions without
problems.
24
EN