General Safety Instructions; Special Product Features - LaserLiner SuperLine-Laser 360 Mode D'emploi

Read the operating instructions and the enclosed brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain. This document must be kept in a safe place
and if the laser device is passed on, this document must be passed on with it.
Automatic laser with horizontal 360° laser circle, 2 vertical lines and slope function
– The horizontal laser line creates a continuous 360° laser line with the vertical lines
aligned perpendicular to it. Ideal for almost any alignment job.
– The 2 vertical lines are aligned at right angles to one another.
– Individually switchable laser lines
– Out-Of-Level: is indicated by optical signals when the unit is outside its self-levelling range.
– Additional slope function to align angled surfaces

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope
of the specifications.
Do not stare into the beam!
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.
– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
– Tampering with (making changes to) the laser device is not permitted.
– This device is not a toy - keep out of the reach of children.

Special product features

Automatic alignment of the device with a magnetically dampened pendulum system.
The device is brought into initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum lock during transport.
Devices with PowerBright technology have special high performance diodes to produce
super bright laser lines These remain visible over longer distances, in bright ambient light
and on dark surfaces.
RX-READY technology enables line lasers to be used even in unfavourable light conditions.
The laser lines pulsate at a high frequency and this can be picked up by special laser
receiversover long distances.
Laser radiation!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014
SuperLine-Laser 360°
07
EN