Special Product Features; Power Supply - LaserLiner AquaPro Mode D'emploi

Special product features

Automatic alignment of the device with a magnetically
dampened pendulum system. The device is brought into initial position
and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum
lock during transport.
Space grids: These show the laser planes and functions.
auto: Automatic alignment / man: Manual alignment
auto
Horizontal
levelling

Power supply

The device can be operated with standard alkali batteries (6 x type AA).
Insert the batteries as shown by the installation symbols. Ensure the
polarity is correct.
Optional: Charging the batteries
Charge the device's battery completely prior to use.
– Open the battery compartment (H), insert the
batteries and connect the plugs to the sockets.
The plugs fit in the sockets in one position only
(see pictures on right). Reclose the battery
compartment.
– Connect the battery charger/mains unit to a
mains source and plug into the socket (M).
Please only use the charger/mains unit supplied
with the device. If a different one is used, the
warranty will become void.
– If the LED (Q) blinks constantly, either the batteries
must be exchanged or recharged.
man man
Vertical Slope
levelling function
90° angle Plumb
function
AquaPro
11
GB