LaserLiner PowerCross-Laser 8 G Manuel D'utilisation page 19

Positioning laser lines
2
The top section of the laser unit can be turned on the plinth to align the lasers approximately.
Precise positioning can then be done with the Vernier adjustment (4). The adjustable feet (7)
allow the device to be positioned on sloping surfaces.
The freely rotatable horizontal circle (3) makes it easy to turn the device to the required angle.
Simply set the scale to zero, then rotate the device to the angle you want.
3 Horizontal and vertical levelling
Switch the laser device on. The automatic sensor is now active and will level the laser
device automatically. As soon as device-levelling is completed and the auto LED (12)
illuminates continuously, horizontal or vertical object levelling can be carried out.
Maximum accuracy is attained when device-levelling is completed.
Lasers can be switched on and off individually with the H or V1/2 buttons (press buttons briefly).
If the unit is placed at an excessive angle (out of its 3° range), the lasers will
blink. Align the device using the adjustable feet (7) or place on a more level
surface.
3
4
Rapid blinking: Set-up phase
Constant illumination: levelling completed.
PowerCross-Laser 8 G
19
EN