LaserLiner PowerCross-Laser 8 G Manuel D'utilisation page 15

– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes
and immediately move away from the beam.
– Tampering with (making changes to) the laser device is not permitted.
– Under no circumstances should optical instruments (magnifying glass, microscope,
binoculars) be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.
– In public areas shield off the laser beam with barriers and partitions wherever possible
and identify the laser area with warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limits in
accordance with the EMC Directive 2014/30/EU which is covered by the Radio Equipment
Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in
the vicinity of people with pacemakers – may apply. Electronic devices can potentially
cause hazards or interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high voltages or high
electromagnetic alternating fields.
Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic compatibility and wireless
radiation regulations and limits in accordance with the RED 2014/53/EU.
– Umarex GmbH & CO. KG hereby declares that the PowerCross-Laser 8 G radio
equipment meets the requirements and other specifications of the European Radio
Equipment Directive 2014/53/EU (RED). The EU Declaration of Conformity can be found
in its entirety at the following address: http://laserliner.com/info?an=AKQ
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents
and solvents. Remove the battery(ies) before storing for longer periods. Store the device in
a clean and dry place.
PowerCross-Laser 8 G
15
EN