Special Product Features; Inserting The Batteries - LaserLiner SuperPlane-Laser 3D Mode D'emploi

Masquer les pouces Voir aussi pour SuperPlane-Laser 3D:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22

Special product features

Automatic alignment of the device with a magnetically dampened pendulum system.
The device is brought into initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum lock during transport.
Laser diodes of the highest performance class produce extremely bright laser lines. They
remain visible even on surfaces at great distances or on dark surfaces and under bright
ambient light conditions.
RX-READY technology enables line lasers to be used even in unfavourable light
conditions.The laser lines pulsate at a high frequency and this can be picked up
by special laser receiversover long distances.
Number and direction of the lasers
H = horizontal laser
V = vertical laser
S = slope function

Inserting the batteries

1
Open the battery compartment (3) and insert
the batteries in accordance with the installation
symbols, ensuring the correct polarity.
1
08
EN
5
b
a
2
3
4
1H360° 2V360°
+
1
Laser emitting window
2
Slide switch
a ON
b OFF / Slope mode /
Transport lock
3
Battery compartment
(bottom)
4
1/4" tripod threads
(bottom)
5
Laser line selection button /
Slope mode on /
Hand receiver mode on / off
When transporting always switch
!
off all lasers, secure the pendulum
and set the slide switch to "OFF"!
Low battery indicator: All laser lines flash
for 3 seconds and then go out when the
battery charge is low.
S

Publicité

Table des Matières
loading

Table des Matières