vita ENAMIC Mode D'emploi page 25

VITA ENAMIC Bibliographie / Imprimés
®
Bibliographie
Al-Harbi, A ; Ardu, S; Bortolotto, T ; Krejci, I. : Stain intensity of CAD/CAM Materials versus Direct composites. IADR 2012
Poster Abstract, Iguaçu Falls, Brasilien
Coldea, A ; Swain, MV ; Thiel, N. : In-vitro strength degradation of dental ceramics and novel PICN material by sharp indentati-
on. J Mech Behav Biomed Mater 2013 Oct;26(10):34-42.
Coldea, A ; Swain, MV ; Thiel, N. : Mechanical properties of polymer-infiltrated-ceramic-network materials. Dental Materials
2013 ; 29 : 419-426
Coldea, A ; Swain, MV ; Thiel, N. : Hertzian contact response and damage tolerance of dental ceramics. J Mech Behav Biomed
Mater 2014; 34:124-133.
Dirxen, C ; Blunck, U ; Preissner, S. : Clinical performance of a new biomimetic double network material.
Open Dent J. 2013 Sep 6;7:118-22. doi: 10.2174/1874210620130904003
He, Li-Hong ; Swain, M. : A novel polymer infiltrated ceramic dental material. Dent Mater. 2011 Jun ; 27(6) : 527-34
He, Li-Hong ; Purton, D. ; Swain, M. : A novel polymer infiltrated ceramic for dental simulation. J Mater Sci Med 2011 ; Jul ;
22(7) : 1639-43
Mörmann, W ; Stawarczyk, B ; Ender, A ; Sener, B ; Attin, T ; Mehl, A. : Wear characteristics of current aesthetic dental
restorative CAD/CAM materials : Two-body wear, gloss retention, roughness and Martens hardness. Journal of the Mechanical
Behavior of Biomedical Materials 2013 ; 20:113-125
Imprimés VITA
Mode d'emploi VITA ENAMIC n° art. 1982F
VITA ENAMIC Documentation technico-scientifique, n° art. 10025F
VITA ENAMIC Le concept, n° art. 10024F
VITA ENAMIC Fiche produit, n° art. 1912F
VITA ENAMIC Information produit, n° art. 1780F
VITA ENAMIC Magazine, n° art. 1911F
VITA ENAMIC Témoignages, n° art. 1938F
VITA ENAMIC STAINS KIT Mode d'emploi, n° art.1931F
VITA ENAMIC STAINS KIT Fiche produit, n° art. 1923F
VITA ENAMIC Polishing Set, Fiche produit, n° art. 1924F
25