Dometic MagicWatch WPS 900F Mode D'emploi page 22

Setting the system
• Parameter 12: Suppress display of fixed objects
Default setting: Off
• Parameter 13: Shut-down delay for rear sensors
Default setting: Off
• Parameter 14: Number of speed signal pulses
Default setting: 3
• Parameter 15: CAN bus status
Default setting: On
• Parameter 16: City function (function 66) or speed-dependent activation and
deactivation (function 67)
Default setting: Speed-dependent activation and deactivation
Speed-dependent activation and deactivation (function 67)
The default setting automatically activates the front parking aid at speeds below
10 km/h and automatically deactivates at speeds above 10 km/h. Connecting a
compatible speed signal is essential for this function to work.
City function (function 66)
This function deactivates the front parking aid the first time a speed of 10 km/h is
exceeded and does not activate it again when the speed falls below 10 km/h. It
is only activated:
– the next time the reverse gear is engaged
– when the right button on the loudspeaker is pressed
– when the external button is pressed (< 5 s)
The next time the ignition is started, the initial 10 km/h limit is activated again.
Connecting a compatible speed signal is essential for this function.
This function is useful when, for example, the parking aid is considered a
nuisance while driving in city traffic when roads are full, or in traffic jams.
• Parameter 17: Reset to default settings
18
WPS900F/WPS910
EN