General; Technical Data - CTC EcoMiniEl 1x230V Instructions D'installation Et D'entretien

General

CTC EcoMiniEl is an external electric boiler for supplying additional heat when the
heat from the heat pump is not enough. EcoMiniEl consists of an immersion heater
and junction box, and is controlled from CTC EcoLogic.
CTC EcoMiniEl has 1" connections for both the inlet and outlet. On CTC EcoMiniEl
there is a small bleeder for expelling air in the system. The tank is approved for a
maximum pressure of 5 bar.
CTC EcoMiniEl is available in the following 2 versions:
1. 3 x 400 V
2. 1 x 230 V
NOTE! CTC EcoMiniEl can be used as an accessory for CTC EcoLogic.

Technical data

CTC EcoMiniEl
Output, immersion heater (kW)
Contactor 1 (kW)
Contactor 2 (kW)
Maximum output (kW)
Step Current (A),
3-phase
C1 4.3
C2 8.7
C3 13.0
The immersion heater has two 1" connections with internal threads and a
bleeder at the top of the tank. To avoid air in the system, connect the supply
water below and the discharge water at the junction box.
180
1 x 230 V 3 x 400 V
2; 4; 6 3; 6; 9
2.00 3.00
4.00 6.00
6 9
Output (kW), Current (A),
3-phase 1-phase
3 8.7
6 17.4
9 26.1
180
1/8"
1"
96
! The immersion
heater must be
mounted vertically.
!
Max. operating
pressure: 5 bar.
Output (kW),
1-phase
2
4
6
Discharge water
Supply water
Min. temp.: +5 °C
Max. temp.: +100 °C
CTC EcoMiniEl
English
EN
37