Technical Data - Leister GEOSTAR G5 Instructions D'utilisation

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil, Switzerland hereby declares the machine
described below, released by us, fulfills the provisions of the following EC directive(s):
Directives:
Harmonised standards:
Kaegiswil, 13/01/2015
Disposal
Electrical equipment, accessories and packagings should be subjected to environmentally friendly
recycling. For EU countries only: Do not dispose of electrical equipment with household refuse! In
accordance with European Guideline 2002/96 regarding waste electrical and electronic equipment
(WEEE) and its implementation in national laws, electrical equipment that can no longer be used must
be collected separately and subjected to environmentally friendly recycling.

Technical data

Device model
* Voltage
Power
Frequency
Temperature, stepless
Drive slow, stepless
Drive fast, stepless
Welding pressure max.
Emission level
Dimensions (L × W × H)
Weight (without power cord) kg/lbs
Mark of conformity
Protection Class I
Device
Welding wedge length
Width of welding wedge
Weld seam width
We reserve the right to make technical changes. Additional versions upon request
*Connection voltage cannot be switched
40
2006/42, 2004/108, 2006/95, 2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 61000-3-11 (Zmax), EN 62233, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
GEOSTAR G5
V~
W
Hz
°C 80 – 460
°F 176 – 788
m/min
ft./min 2.6 – 19.6
m/min 1.5 – 12
ft./min 4.9 – 39.3
N/lbs 1500 / 337
L (dB)
pA
mm 482 × 278 × 269
16.4 / 36.2
mm
mm
mm
Andreas Kathriner, GM
GEOSTAR G5
120 200 / 230
1800
50 / 60 50 / 60
80 – 460
176 – 788
0.8 – 6 0.8 – 6
2.6 – 19.6
1.5 – 12
4.9 – 39.3
1500 / 337
60
482 × 278 × 269
16.4 / 36.2
G5
90
50
2 × 15
GEOSTAR G7
2800
50 / 60
80 – 460
176 – 788
0.8 – 7
2.6 – 22.9
1.5 – 12
4.9 – 39.3
1500 / 337
60
482 × 278 × 269
17.7 / 39
2 × 15
230
2800
60
G7
130
50