Technical Data - Leister VARIMAT V2 Instructions D'utilisation

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confirms that this product, in the
version as brought into circulation through us, fulfils the requirements of the following EC directives.
Directives:
Harmonised standards:
Kaegiswil, 22.10.2014
Disposal
Power tools, accessories and packaging should be sorted for environmental-friendly recycling. Only
for EC countries: Do not dispose of power tools into household waste! According to the European
Directive 2002/96 on waste electrical and electronic equipment and its incorporation into national law,
power tools that are no longer suitable for use must be separately collected and sent for recovery in
an environmental-friendly manner.

Technical data

Voltage
Power consumption
Frequency
Temperature
Speed
Welding pressure
Air flow
Emission level
Weight
without power supply cord
Dimensions L× W× H
Mark of conformity
Approval mark
Protection class I
Technical data and specifications are subject to change without prior notice
# Mains voltage cannot be switched over
20
2006/42, 2004/108, 2006/95, 2011/65
EN 12100
EN 55014-1, EN 55014-2, EN 61000-6-2
EN 61000-3-2, EN 61000-3-12, EN 61000-3-3, EN 61000-3-11 (Z
EN 62233, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
200, 230, 400 #
V~
W 4200, 4600, 5700
Hz 50 / 60
°C 100 – 620 stepless
m/min. 0.7 – 12 stepless
N approx. 190 (2 weights)
% 50 – 100
L (dB) 70
pA
kg 35
650 × 430 × 330
mm
Andreas Kathriner, GM
200, 230, 400 #
V~
W 4200, 4600, 5700
Hz 50 / 60
°F 212 – 1148 stepless
ft/min 2.3 – 39.4 stepless
N approx. 190 (2 weights)
% 50 – 100
L (dB) 70
pA
lbs 77
25 × 17 × 13
inch
2
3
1
)
max