Valve Train Assembly - Continental Fireplaces CLHD45N Instructions D'installation Et D'opération

7.1.2 VALVE TRAIN ASSEMBLY

Remove the door, see "DOOR REMOVAL / IN-
A.
STALLATION" section.
Remove the media tray and burner, see "BURNER
B.
REMOVAL" section.
Remove the fourteen screws from the valve train
C.
assembly. Carefully lift the valve train assembly
and turn off the manual shut-off valve, see "GAS
INSTALLATION" section.
NOTE: A new gasket may be required, when re-installing
the valve train assembly, contact your local Authorized dealer
/ distributor.
37
EN
W415-1336 / 08.21.14