Information and explanation
of symbols
With the CE symbol, Unitron confirms that this
Unitron product – including accessories – meets
xxxx
the requirements of the Medical Devices Directive
93/42/ EEC as well as the Radio Equipment Directive
2014/53/EU on radio and telecommunications
transmitters.
The numbers after the CE symbol correspond to the
code of certified institutions that were consulted under
the above-mentioned directives.
This symbol indicates that it is important for the user
to read and take into account the relevant information
in this user guide.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and effective use
of the product.
Australia and New Zealand EMC and
Radiocommunications compliance label.
This symbol indicates that the products described in
these user instructions adhere to the requirements
for an application part of Type B of EN 60601-1. The
surface of the hearing aid is specified as applicated
part of Type B.
©
Copyright symbol
34
Operating conditions:
This device is designed such that it functions without problems or
restrictions if used as intended, unless otherwise noted in these
user guides.
Transport conditions:
Temperature: –20° to +60° Celsius (–4° to +140° Fahrenheit).
Humidity Transportation: Up to 90% (non condensing).
The symbol with the crossed-out garbage bin is to
make you aware that this device may not be thrown
away as normal household waste. Please dispose
of old or unused devices, at waste disposal sites
intended for electronic waste, or give your device to
your hearing healthcare professional for disposal.
Proper disposal protects the environment and health.
The Bluetooth
word mark and logos are registered
®
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Unitron is under license. Other
trademarks and trade names are those of their
respective owners.
uTV
uTV is a trademark of Unitron.
35