Information And Explanation Of Symbols - Unitron T Insera Pro Guide D'utilisation

Cause
Not clear, distorted
Poorly fitting hearing
aids
Hearing aids blocked
with ear wax
Low battery
Weak on the telephone
Low volume
Telephone not
positioned properly
Hearing aid requires
adjustment
For any problems not listed in the guide, contact your
hearing healthcare professional.
38
Possible remedy
Consult your hearing
healthcare professional
See "Cleaning your hearing
aids." Consult your hearing
healthcare professional
Replace battery
Turn up volume
Move telephone receiver
around ear for clearer signal.
See "Using the telephone"
Consult your hearing
healthcare professional
Information and explanation of
symbols
With the CE symbol, Unitron confirms that this
Unitron product – including accessories – meets the
xxxx
requirements of the Medical Devices Directive 93/42/
EEC as well as the Radio Equipment Directive 2014/53/
EU on radio and telecommunications transmitters.
The numbers after the CE symbol correspond to the
code of certified institutions that were consulted under
the above-mentioned directives.
This symbol indicates that it is important for the user to
read and take into account the relevant information in
this user guide.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and effective use of
the product.
Australia and New Zealand EMC and
Radiocommunications compliance label.
This symbol indicates that the products described in
these user instructions adhere to the requirements for
an application part of Type B of EN 60601-1. The surface
of the hearing aid is specified as applicated part of
Type B.
©
Copyright symbol
39