Information And Explanation Of Symbols - Unitron telecommande 2 Mode D'emploi

Information and explanation of symbols

With the CE symbol, Unitron confirms that this
Unitron product – including accessories – meets the
xxxx
requirements of the Medical Devices Directive 93/42/
EEC as well as the Radio Equipment Directive 2014/53/
EU on radio and telecommunications transmitters. The
numbers after the CE symbol correspond to the code
of certified institutions that were consulted under the
above-mentioned directives.
This symbol indicates that it is important for the user to
read and take into account the relevant information in
this user guide.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and product safety.
Australia and New Zealand EMC and
Radiocommunications compliance label.
This symbol indicates that the products described in
these user instructions adhere to the requirements for
an application part of Type B of EN 60601-1. The surface
of the hearing aid is specified as applicated part of
Type B.
©
Copyright symbol
20
This symbol shall be accompanied by the name and
the address of the authorised representative in the
European Community.
This symbol shall be accompanied by the name and
the address of the manufacturer (who are placing this
device on the market).
Operating conditions:
This device is designed such that it functions without problems or
restrictions if used as intended, unless otherwise noted in these
user guides.
Transport conditions:
Temperature: –20° to +60° Celsius (–4° to +140° Fahrenheit).
Humidity: Up to 90% (non condensing).
The symbol with the crossed-out garbage bin is to make
you aware that this device may not be thrown away
as normal household waste. Please dispose of old or
unused devices, at waste disposal sites intended for
electronic waste, or give your device to your hearing
healthcare professional for disposal. Proper disposal
protects the environment and health.
21