Information And Explanation Of Symbols - Unitron uTV 2 Manuel D'utilisation

The digitally-coded, inductive transmission
technology used in these devices is
extremely reliable and experiences virtually
no interference from other devices. It should
be noted, however, that when operating
the system near computer equipment,
larger electronic installation or other
strong electromagnetic fields, it may be
necessary to be at least 60 cm (24") away
from the interfering device to ensure proper
operation.
X-ray radiation, CT or MRI scans may
destroy or adversely affect the correct
functioning of the devices.
Do not use these devices in areas where
electronic equipment is prohibited.
32

Information and explanation of symbols

With the CE symbol, Unitron confirms that this
Unitron product – including accessories – meets
xxxx
the requirements of the Medical Devices Directive
93/42/ EEC as well as the Radio Equipment Directive
2014/53/EU on radio and telecommunications
transmitters.
The numbers after the CE symbol correspond to the
code of certified institutions that were consulted under
the above-mentioned directives.
This symbol indicates that it is important for the user to
read and take into account the relevant information in
this user guide.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and product safety.
Australia and New Zealand EMC and
Radiocommunications compliance label.
This symbol indicates that the products described in
these user instructions adhere to the requirements for
an application part of Type B of EN 60601-1. The surface
of the hearing aid is specified as applicated part of
Type B.
33