Information And Explanation Of Symbols - Unitron T Stride P Pro Mode D'emploi

Cause
Weak on the telephone
Telephone not
positioned properly
Hearing aid requires
adjustment
For any problems not listed in the guide, contact your
hearing healthcare professional.
42
Possible remedy
Move telephone receiver
around ear for clearer signal.
See "Using the telephone"
Consult your hearing
healthcare professional

Information and explanation of symbols

With the CE symbol, Unitron confirms that this
Unitron product – including accessories – meets
xxxx
the requirements of the Medical Devices Directive
93/42/ EEC as well as the Radio Equipment Directive
2014/53/EU on radio and telecommunications
transmitters.
The numbers after the CE symbol correspond to the
code of certified institutions that were consulted under
the above-mentioned directives.
This symbol indicates that it is important for the user
to read and take into account the relevant information
in this user guide.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and effective use
of the product.
Australia and New Zealand EMC and
Radiocommunications compliance label.
This symbol indicates that the products described in
these user instructions adhere to the requirements for
an application part of Type B of EN 60601-1. The surface
of the hearing aid is specified as applicated part of
Type B.
©
Copyright symbol
43