Setup Cleaning Programs; Setup Bottle Configuration - Struers Prepamatic-2 Mode D'emploi

Setup Cleaning Programs

Setup Bottle Configuration

24
Prepamatic-2
Instruction Manual
User defined cleaning programs can be edited here. After selecting
SETUP CLEANING PROGRAMS and pressing

ENTER , chose one of the Empty Programs and press

ENTER .Select the step to be changed and press ENTER
From the pop-up menu select the required cleaning media then
specify the length of time that this media should be applied. Up to 10
different steps can be combined in a Cleaning Program. The name of
the Cleaning Program can be edited afterwards.
The contents of the bottle unit can be defined in this sub-menu.

Pressing ENTER
available suspensions and lubricants can be selected. To add new
consumables, please see the following section, SETUP USER
CONSUMABLES.
The different suspensions and lubricants used must be defined here
so that Prepamatic-2 can locate the correct suspension or lubricant.
will show a pop-up menu from which all
.
