Using The Specimen Holder; Starting The Process - Struers Prepamatic-2 Mode D'emploi

Using the Specimen Holder

Starting the Process

18
Prepamatic-2
Instruction Manual
When using a specimen holder, 3 specimens need to be prepared at
a time. These specimens should have approximately the same size
and hardness to avoid uneven grinding.
Place the specimen holder in the levelling device and tighten the

screw on the side to fix the holder in position.
Insert the specimens into the openings and clamp them by

tightening the screw.
Insert the head with the specimen mover plate in

Prepamatic-2.
Select screws of the correct length. Screw that are too long may stick out
from the specimen holder and result in collisions with parts of Prepamatic-2

Press START

automatically.
IMPORTANT
during operation.
and the process will be carried out