Güde MIG 155/6W Mode D'emploi page 16

Environmental protection:
The packaging material
Do not litter the waste
from the cardboard can
freely, after their
be handed in for
selection dispose them
recycling at points
expertly.
intended for that.
Packaging:
Orientation on the
Protect from moisture
Technical specifications:
Connection to the mains
Specific for the product:
Welding Safeguard of the
transformer mains
Use in accordance with designation
The welding machine for welding inside the protective gas intended to thermal joining of iron – metals by fusing the
edges and feeding the additional material.
In case that either instructions implying from universal regulations or instructions contained in this guide are not
observed, the producer cannot assume responsibility for any damage.
Residual risks and preventive measures
Mechanical residual risks
Threat
Punching, incision
Splashing of liquids
Electrical residual risks
Threat
Direct contact with electricity
Thermal residual risks
Threat
Burns, frost-bites
Electric or electronic
appliances that are
damaged or intended for
disposal must be handed
over for recycling at
points intended for that.
packaging Attention fragile
upwards
Weight 230 V
Thermal protection
Description
Hands may be punched with a
wire.
splashing drops when welding
could cause burns.
Description
Direct contact with electricity by
damp hands could cause an
electric shock.
Description
Contact with hose nozzle and
with piece being treated could
cause burns.
400 V
Protective measure
Use protective gloves or perhaps
also keep your hands in safe
distance from wire output
Wear protective clothes and
welding mask.
Protective measure
Avoid touching by damp hands
and be particular about proper
grounding.
Description
The hose nozzle and piece being
treated should be cooled after
operation ended first. Wear
protective gloves.
16
Residual risk
Residual risk
Residual risk