Technical Specifications - Güde MIG 155/6W Mode D'emploi

Danger from radiation
Threat
Infrared, visible and ultraviolet
light
Danger from the material being treated and other substances
Threat
Contact, aspiration
Fire or explosion
Other dangers
Threat
Slipping, tipping up, or fall of
persons
Disposal
Instructions for waste disposal implying from pictograms that are located on the machine or possibly on the packaging.
The explanation of such signs can be found in chapter "Marking on the machine".
Requirements for operators
The operator must read the guide for operation carefully before any use the machine.
Qualification
No special qualification except detailed instruction session led by an expert is necessary for use of the machine.
Minimum age
The machine may be operated by persons older than 18 years only.
The exception when operation of the machine by a juvenile person is the case when the machine is used during a
special training to get skills under supervision of a trainer.
Training
For the operation of the machine just corresponding instruction is required. No special training is necessary.

Technical specifications

MIG 155/6W - #20072
Voltage
230 V
Frequency
50 Hz
Max. power output of
5,7 kVA
the mains
Fuse
16 A
Voltage of idle run
48 V
Adjustment range
25-130 A
Turned-on period
130 A ~ 10 % 75 A ~30 %
Max. wire thickness
0.6-1.0 mm
Insulation class
H
Protection type
IP 21 S
Shifting levels 6
Weight approx. 25 kg
Product No. 20072
Description
Electric arc generates infrared
and ultraviolet radiation.
Description
Prolonged aspiration of welding
gases could be harmful for
health.
Hot slag and sparkles could
cause a fire.
Description
Cables and hoses could be the
cause of tripping up and falls.
Protective measure
Use suitable protective welding
shield, protective clothes and
protective gloves.
Protective measure
When working use an exhaustion
facility or work in areas with good
ventilation. Avoid direct inhalation
of gases.
Never operate the machine in the
environment where a fire could
occur easily.
Protective measure
Keep the workplace in order..
17
Residual risk
Residual risk
Residual risk