Using Text Effects - Pioneer SVM-1000 Mode D'emploi

USING THE EFFECT FUNCTION

USING TEXT EFFECTS

TEXT effects can be instantaneously set in-sync with the BPM
(Beat Per Minute) of the track, enabling you to apply various TEXT
effects to the rhythm.
When master monitor is off
1
2
6
5
When master monitor is on
1
2
4
1 Motion select
buttons
2 [TEXT BANK]
buttons
3 TEXT BANK
display
4 Effect mode
select button
5 Video EFFECT
monitor
6 [TEXT EDIT]
button
20
En
5
Select and touch the desired motion icon
from the 6 TEXT motions.
Touch the text button of your choice from
the 6 texts.
Rotate the VIDEO FX PATTERN/TEXT
BANK dial to select a TEXT BANK from
the 10 available.
A: Touch to apply the effect to audio only.
AV: Touch to apply the effect to both
audio and video.
V: Touch to apply the effect to video only.
Monitors the TEXT effects.
Touch while editing the text rows of the
TEXT BANK to enter the TEXT EDIT
screen.
7 [BPM
AUTO/TAP]
button
8 Parameter
display
9 Beat
button/beat
display
1 Touch the [BPM AUTO/TAP] button to select the BPM (=Beat
3
Per Minute) measurement mode.
AUTO: The BPM is automatically measured from the input
music signal.
4
TAP: Tap the TAP button with your finger to manually input the
BPM.
• Whenever power is first turned ON, [AUTO] is selected by
3
default.
• The selected mode ([AUTO]/[TAP]) will appear in the
display.
• When a BPM cannot be measured automatically, the BPM
7
display in the display will flash.
• The measurement range of AUTO mode is BPM=70 to 180.
8
Depending on the track, the BPM may not be accurately
measured. In these cases, use TAP mode to manually input
9
the BPM.
2 Touch the effect category button [TEXT].
• The [TEXT] button will be highlighted and an animation will
appear.
• The TEXT effect screen will be displayed.
3 Select a text motion using the motion select buttons.
• The selected button will be highlighted and an animation
will appear.
• For a description of each effect, refer to P. 30.
4 Choose a text from TEXT BANK.
• Rotate the VIDEO FX PATTERN/TEXT BANK dial to select
TEXT BANK and touch the [TEXT BANK] button to select the
text.
3
• The selected button will be highlighted.
5 Use the CH SELECT dial to select the channel to which you
wish to apply the effect.
6
• The selected effect channel display will be highlighted.
• If [MIC] is selected, the audio effect will be applied to both
MIC 1 and MIC 2. There will be no effect on the video.
7
6 Touch the effect mode select buttons to choose the effect
8
mode.
• The selected button will be highlighted and an animation
9
will appear.
A: An effect will be applied to the audio only.
AV: An effect will be applied to both the audio and video.
V: An effect will be applied to the video only.
Touch to switch the measurement
method of the BPM between AUTO and
TAP. Pressing the TAP button will also
switch this to TAP.
Displays the measured BPM and effect
parameters.
Touch to select the multiplication factor
of the beat calculated from the BPM for
synchronization of effects.