Using Touch Effects - Pioneer SVM-1000 Mode D'emploi

USING THE EFFECT FUNCTION

USING TOUCH EFFECTS

With TOUCH effects, many effects can be created by touching the
video EFFECT performance monitor.
When master monitor is off
1
6
2
3
When master monitor is on
1
2
6
1 Effect select Select and touch the desired effect icon
from the 12 TOUCH effects.
buttons
2 Effect mode A: Touch to apply the effect to audio only.
select buttons
AV: Touch to apply the effect to both
audio and video.
V: Touch to apply the effect to video only.
3 Video EFFECT
Touch to change the location information
performance for TOUCH effects.
monitor
Rotate the VIDEO FX PATTERN/TEXT
4 Video effect
BANK dial to select the video effect
pattern display
pattern. The pattern will differ depending
on the effect type.
5 Parameter
Displays the TOUCH effect parameter.
display
6 [HOLD] button
Touch to hold the effect obtained when
touching the video EFFECT performance
monitor.
7
4
5
4
2 3
5
7
7 [VISUALIZER Internally creates a video image to which
MODE] button TOUCH effects can be applied.
1 Touch the effect category button [TOUCH].
• The [TOUCH] button will be highlighted and an animation
will appear.
• The TOUCH effect screen will be displayed.
2 Select an effect from the effect select buttons.
• The selected button will be highlighted and an animation
will appear.
• For descriptions of each effect, refer to P. 25.
3 Use the CH SELECT dial to select the channel to which you
wish to apply the effect.
• The selected effect channel will be highlighted.
• If [MIC] is selected, the audio effect will be applied to both
MIC 1 and MIC 2. There will be no effect on the video.
4 Touch the effect mode select button to select the effect
mode.
• The selected button will be highlighted and an animation
will appear.
5 Set the EFFECT ON/OFF button to ON to apply the effect.
• Each time the button is pressed it will switch between ON
and OFF (whenever power is first turned ON, the setting
defaults to OFF).
• When effect is ON, the button flashes.
6 Touch the video effect performance monitor to change the
location information for the effect.
• When the [HOLD] button is ON, the track from the point
where the display is touched to where it is released will be
saved and repeatedly output.
• Each time the [HOLD] button is touched it will switch
between ON and OFF.
• Whenever power is first turned ON, the setting defaults to
OFF.
Pattern
Rotate the VIDEO FX PATTERN/TEXT BANK dial to select a video
effect pattern of the selected video effect.
For descriptions of the video pattern changes caused by rotating
the VIDEO FX PATTERN/TEXT BANK dial, refer to P. 25.
Parameter 1
Rotate the TIME/PARAMETER dial to adjust the temporal
parameters for the selected effect.
For descriptions on the changes in parameter 1 caused by rotating
the TIME/PARAMETER dial, refer to P. 25.
Parameter 2
Rotate the LEVEL/DEPTH dial to adjust the quantitative
parameters for the selected effect.
For descriptions on the changes in parameter 2 caused by rotating
the LEVEL/DEPTH dial, refer to P. 25.
VISUALIZER MODE
A video is created internally, and TOUCH effects can be applied to
it.
This is effective when no input video is present.
19
En