Pioneer SVM-1000 Mode D'emploi page 26

USING THE EFFECT FUNCTION
Description of the effect
AUDIO Outputs a phaser effect with
reverberation.
(*4)
VIDEO Outputs an image with a periodical warping effect.
PATTERN1 Outputs an image with spiral
warp.
PATTERN2 Outputs an image with screen
warping radially from the
touched point.
PATTERN3 Outputs an image with
fragmented warp.
PATTERN4 Outputs an image in which the
screen warps with the
appearance of paint mixed with
water.
AUDIO Modulates the input sound. The
bass sound has a metallic
quality.
VIDEO Outputs an images lined in blocks.
PATTERN1 Outputs an image in which the
touched block stretches and
shrinks in the horizontal and
vertical direction.
PATTERN2 Outputs an image in which the
touched block stretches and
shrinks in the horizontal
direction.
PATTERN3 Outputs an image in which the
touched block stretches and
shrinks in the vertical direction.
PATTERN4 Outputs an image in which the
touched block changes color.
AUDIO Outputs audio as if the input
sound has been crushed.
VIDEO Outputs an image with a radial concentric effect.
PATTERN1 Outputs an image that appears
like a light shining from behind.
PATTERN2 Outputs an image that spreads
radially.
PATTERN3 Outputs an image of circles
spreading concentrically.
PATTERN4 Outputs an image combining
PATTERN 2 and PATTERN 3.
26
En
Description of the effect when
touched
Touch more toward the right to
increase the length of the phaser
effect cycle. Touch toward the left for
shorter cycle length.
The warp effect is applied centering
on the touched point. The longer you
touch the screen, the stronger the
effect becomes.
Touch the screen toward the right to
enhance the effect. Touch toward
the left to reduce the effect.
Outputs an image in which the
touched block stretches and shrinks
in the horizontal and vertical
direction.
Outputs an image in which the
touched block stretches and shrinks
in the horizontal direction.
Outputs an image in which the
touched block stretches and shrinks
in the vertical direction.
Outputs an image in which the
touched block changes color.
Touch the screen toward the right to
enhance the effect. Touch toward
the left to reduce the effect.
The touched location will have the
central coordinates of the effect.
Parameter 1 Parameter 2
(TIME/PARAMETER) (LEVEL/DEPTH)
Description Description
– – Sets the balance
between the original
sound and the effect
sound.
Sets the area in 1 to 10 Sets the balance
which the effect is between the original
applied. video and the effect
video.
– – Sets the balance
between the original
sound and the effect
sound.
Sets the number of 1 to 10 Sets the balance
partitions of the between the original
blocks. video and the effect
video.
– – Rotate the dial
clockwise to enhance
the effect. When dial is
rotated fully
counterclockwise, only
original sound is
output.
Sets the color. 1 to 10 Sets the balance
between the original
video and the effect
Sets the opening of
video.
the center.
Sets the opening of
the center.
Sets the opening of
the center.