INSTALLATION MANUAL
SASIC
Interlocking controller
4] MOUNTING INSTRUCTIONS
Please check that nothing is missing from the assembly kit before proceeding to install the
system. Prepare the appropriate tools (drill, screwdriver, tape measure, ...) and follow the
assembly recommendations for this locking system.
Mounting the central unit
Assemble the elements supplied in the kit (lock +
switch) to complete the installation of the SASIC-
SASCP central unit. Fix the cabinet in the vertical
position using all of the screw holes provided for
cdvi.com
30
cdvigroup.com
easy mounting of the cabinet structure. To install
the back-up battery (REF: B7AH, optional), insert
the battery as shown then connect the two connector
lugs to the SASIC PCB Board.
EN