5
FAN button
Press this button, Auto, Low, Middle, High speed can be circularly selected. After powered
on, Auto fan is not available for this mode. When pressing AUTO button, the fan speed
will not change.
Note: Under the Dry mode, the fan speed isn't adjustable, low fan speed is imperative,
but when operating this button, the wireless adjustable, low fan speed is imperative.
6
button
Press this button turn on swing function; 4s later, press this button to turn off the swing
and it will operate like that circularly.
Other air conditioners, press this button, to set up swing angle, which circularly
changes as below:
This is an universal use remote controller. If remote controller sends the following three
kinds of status that the swing status of main unit will be:
When the guide louver start to swing up and down, if turn off the Swing, the air guide
louver will stop at current position.
which indicates the guide louver swings up and down between that all five positions.
7
CLOCK button
Press this button, the clock can be set up, signal
the value can be adjusted by pressing + or - button, if continuously press this button for
2 seconds above, in every 0.5 seconds, the value on ten place of Minute will be increased
1. During blinking, repress the Clock button, signal
denotes the setting succeeded. After powered on,12:00 is defaulted to display and signal
will be displayed. If there is signal
is Clock value, otherwise is Timer value.
8
LED button
Press this button can turn on or turn off the LED light on the panel.
9
TIMER ON button
Timer On setting: Signal "ON" will blink and display, signal
section will become the timer on setting status. During 5 seconds blink, by pressing + or
- button to adjust the time value of numerical section, every press of that button, the value
will be increased or decreased 1 minute. Hold pressing + or - button, 2 seconds later, it
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
AUTO
Low fan
Middle fan
OFF
be displayed that denotes the current time value
- 8 -
High fan
blink and display. Within 5 seconds,
will be constantly displayed and it
will conceal, the numerical