Introduction For Buttons On Remote Controller - Gree GRH085DA-K3NA1A Manuel D'utilisateur

Masquer les pouces Voir aussi pour GRH085DA-K3NA1A:
Table des Matières

Publicité

Introduction for buttons on remote controller

Note:
● This is a general use remote controller, it could be used for the air conditioners with multifunction; For
some function, which the model doesn't have, if press the corresponding button on the remote controller
that the unit will keep the original running status.
● After putting through power, air conditioner will give out a sound and operation indicator "
(red indicator). You can operate the air conditioner through the remote controller.
● At ON status, after each pressing button on remote controller, the signal icon "
flash once.Air conditioner will give out a sound,which
● Under off status, set temperature and clock icon will be displayed on the display of remote controller
(If timer on, timer off and light functions are set, the corre-sponding icons will be displayed on the display of
remote controller at the same time); Under on status, the display will show the corresponding set function icons.
1
ON/OFF button
Press this button, the unit will be turned on, press it once more, the unit will be turned
off. When turning on or turning off the unit, the Timer, Sleep function will be canceled,
but the presetting time is still remained.
2
MODE button
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode
is default while power on. Under Auto mode, the temperature will not be displayed;
Under Heat mode, the initial value is 28℃(82℉); Under other modes, the initial value is
25℃(77℉).
(Only for cooling and heating unit. As for cooling only unit, it won't have any action when it receives the signal of heating
operation.)
3
- button
Presetting temperature can be decreased. Press this button, the temperature can be set up,
continuously press this button and hold for two seconds, the relative contents can quickly
change, until unhold this button and send the order that the℃(℉) signal will be displayed
all the time. The temperature adjustment is unavailable under the Auto mode, but the order
can be sent by if pressing this button.
4
+ button
For presetting temperature increasing. Press this button, can set up the temperature, when
unit is on. Continuously press and hold this button for more than 2 seconds, the corresponding
contents will be changed rapidly, until unpress the button then send the information, ℃(℉)
is displlaying all along. In Auto mode, the temperature can not be set up, but operate this button
can send the signal. Centigrade setting range: 16-30; Fahrenheit scale setting range 61-86.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
indicates the signal has been sent to air conditioner.
AUTO
COOL
DRY
- 7 -
"
on remote controller will
FAN
HEAT
" is ON

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Grh120da-k3na1a

Table des Matières