Silverline 262705 Traduction Des Instructions Originales page 9

Troubleshooting
Problem
No Operation
Poor cutting performance
Excessive vibration during
operation
Possible cause
Plug fuse
Worn brushes
Power tool internal fault
Blade teeth blunt or damaged
Incorrect Blade type
Incorrectly fitted Blade
Blade distorted, bent or damaged
Blade fitted incorrectly
Internal tool fault
DIY 1400W Compound Mitre Saw
Solution
Replace fuse
Replace brushes or have brushes replaced at an authorised Silverline service
centre
DO NOT USE, contact an authorised Silverline service centre
Replace Blade
Use the correct Blade for material being cut
Remove and refit Blade as per instruction in this manual
Replace Blade
Refit Blade
DO NOT USE, contact an authorised Silverline service centre
silverlinetools.com
9