Care And Maintenance - Blueair DustMagnet 5210i Manuel Utilisateur

Care and maintenance

General
•
Disconnect the air purifier from the power supply before maintenance.
•
Do not allow foreign objects to enter the air inlets or air outlets. This may cause electric
shock or damage the air purifier.
•
Never clean with gasoline, chemical solvents or corrosive materials as these agents may
damage the air purifier.
•
Make sure the air purifier is completely dry before connecting it to power.
•
Do not wash the main filter. The main filter is not washable or reusable.
Cleaning
•
Clean the pre-filters by wiping with a dust cloth or vacuuming with a soft brush
attachment (not included).
•
Wipe the exterior of the air purifier with a soft, clean, damp cloth.
•
Vacuum the small air inlets with a soft brush attachment (not included).
•
Vacuum the inside of the air purifier with a soft brush attachment (not included).
•
Clean and check the power cable and power plug for wear or damages.
•
Clean the sensor when changing the main filter.
Moving the air purifier
Important!
•
Unplug the air purifier before moving it.
•
Make sure that the filter hatches on the air purifier are securely closed.
•
Lift the air purifier to move it. Do not drag or push the air purifier.