Clean The Air Quality Sensor - Blueair DustMagnet 5210i Manuel Utilisateur

Clean the air quality sensor

The inlet for the air quality sensor is located at the back of the air purifier.
opening to clean the inlet for the sensor.
Important!
Do not use fingers or any unrecommended objects to clean inside the sensor inlet.
Step 1
Turn the unit off and unplug it.
1
Step 3
Gently clean the sensor with a cotton swab,
and attach the sensor lid.
2
Step 2
Remove the lid covering the sensor.
Step 4
Plug in the unit.
Vacuum the