Care And Maintenance - Blueair DustMagnet Série Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Care and maintenance

General
Disconnect the air purifier from the power supply before maintenance.
Do not allow foreign objects to enter the air inlets or air outlets. This may cause electric
shock or damage the air purifier.
Never clean with gasoline, chemical solvents or corrosive materials as these agents may
damage the air purifier.
Make sure the air purifier is completely dry before connecting it to power.
Do not wash the main filter. The main filter is not washable or reusable.
Cleaning
Clean the pre-filters by wiping with a dust cloth or vacuuming with a soft brush
attachment (not included).
Wipe the exterior of the air purifier with a soft, clean, damp cloth.
Vacuum the small air inlets with a soft brush attachment (not included).
Vacuum the inside of the air purifier with a soft brush attachment (not included).
Clean and check the power cable and power plug for wear or damages.
Clean the sensor when changing the main filter.
Moving the air purifier
Important!
Unplug the air purifier before moving it.
Make sure that the filter hatches on the air purifier are securely closed.
Lift the air purifier to move it. Do not drag or push the air purifier.
18

Publicité

Table des Matières
loading

Table des Matières