Charging the battery
1. Plug the small end of the USB cable into the micro-USB connector on the right
earcup.
2. Plug the other end into a USB wall charger or computer that is powered on.
Allow up to three hours to fully charge the battery. A full charge will power the
headphones for up to 15 hours.
A 15-minute partial charge will power the headphones for 2 hours.
Note: The headphones will not play while charging.
Battery indicator
The battery indicator is located on the right earcup. While the battery is charging,
the battery indicator glows amber. When the battery is fully charged, the indicator
glows green.
Note: While the headphone are in use, the battery indicator will blink red when the
battery needs charging. See "Headphone status indicators" on page 17.
O P E R AT I O N
E N G L I S H - 1 1