Yamaha DPX-1300 Mode D'emploi page 53

Memory copy
Copy the settings stored in a memory number to another memory number.
or
Remote Control Main Unit
or
Remote Control Main Unit
or
Main Unit
Remote Control
1. Recall the memory number to be
the copy source.
2. Press the g button to select
"Memory number status" from
the bottom of the screen.
3. Press the + button to open the
submenu.
4. Press the h or g button to select
a memory number to be the copy
destination.
Memo
• You cannot select a source memory
number (gray colored) as a copy
destination.
• You cannot select a locked memory
number (marked " ") as a copy
destination.
Move Menu Window
Image Signal Initial
Black Level 0
White Level 0
Gamma Trim a b c
Hue 0
Saturation 100
Sharpness Gain 2
Sharpness Type 2
Color Adjustment WRGB
White Peaking 0
Iris
Level Adjustment
+ : Enter Memory 1
Memory number status
Move Menu Window
Image Signal Initial
Memory 1
Memory 2
Memory 3
Memory 4
Memory 5
Memory 6
: Fix
Move Menu Window
Image Signal Initial
Memory 1
Memory 2
Memory 3
Memory 4
Memory 5
: Fix : Copy Memory 6
Setup
d e
6500K + 0.000uv
-
VIDEO
Setup
VIDEO
10
Setup
VIDEO
51