Top View; Side View; Using The Device For The First Time; Dab Mode - PERFECTPRO ROCKBULL Mode D'emploi

Masquer les pouces Voir aussi pour ROCKBULL:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Top View

11
11. VOLUME control
12. TUNING / SEEK / TIME SET control
13. ANTENNA

Side View

14
15
14. AUX-IN socket
15. USB device / DC Out (5V/1A)
7
13
12

USING THE DEVICE FOR THE FIRST TIME

1. Place the radio on a flat surface.
2.
Carefully extend the antenna located on the top of the radio. Adjust the antenna so
it is vertically extending above the radio.
3.
Plugging the AC power cord into the AC socket. The radio will start up and
the display will show the Perfect Pro logo for a few seconds. Then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band
in the back ground.
4. When the scan is completed, the 10 strongest FM stations and the first 10 DAB
stations will be stored as presets. The radio will switch to standby with the updated
clock and date showing on the display.
5.
If no signals are found, the clock will not be updated. It may be necessary to
relocate the radio to a position giving better reception.

DAB MODE

Operating the radio

1.
Carefully extend the antenna. Press the ON/OFF button to switch on the radio.
2.
Select DAB by pressing the SOURCE button.
3. The first station in the list of stations found will be played. The display will show
the station name. If the radio has been used before, the last used station will be
selected.
4.
If no DAB signals are detected, "No stations available" will be displayed. It may
be necessary to relocate the radio to a position with better reception. You should
then carry out an auto scan to find stations, please refer to the section "Find new
stations - DAB".

Selecting a station

1.
Press the ON/OFF button to switch on the radio.
2.
The display shows the name of the radio station currently selected.
Rotate the TUNING control to show the available station list.
3.
4.
Rotate the TUNING control to scroll through the list to find the desired station,
press the TUNING control to select the station.
Note: If after selecting a station the display shows "No stations available", it may be
necessary to relocate the radio to a position with better reception.

Secondary services

1.
Certain radio stations have one or more secondary services associated with them.
If a station has a secondary service associated with it, then the secondary service
will appear immediately after the primary service as you turn the TUNING control.
2.
Press the TUNING control to select the secondary service.
Most of secondary services do not broadcast continually and if the selected service
is not available, the radio will re-tune to the associated primary service.
GB
GB
8

Publicité

Table des Matières
loading

Table des Matières