Powering The Radio; Using The Radio For The First Time - PERFECTPRO DAB+Pro Mode D'emploi

Powering the radio

1. Battery operation
Installing the batteries: first turn battery compartment cover fixture anti-clockwise to loosen and open the
battery compartment cover to your right. Insert 4 x C size (UM-2) batteries into the compartment.
Ensure the batteries are inserted in accordance with the diagram shown.
Close the battery compartment cover and fasten the fixture by turning clockwise.
If the radio is not to be used for any extended period of time, it is recommended that the batteries are
removed from the radio.
Reduced power, distortion and a "stuttering sound" or low battery sign flashing on the display are all
signs that the batteries need to be replaced.
2. AC operation
Before you plug the AC power cord into the AC socket, make sure the voltage is correct. If you have
batteries in the radio and use the AC power, the batteries will automatically be disconnected.
AC power cord storage is designed to store the cord when the radio is not in use.

Using the radio for the first time

1. Place your radio on a flat surface.
2. Be sure to screw in the antenna properly to get best reception.
3. Plug the AC power cord into an AC socket. The display will show "Welcome to Digital Radio" for a few
seconds. After short time, the current time will appear on the display.
4. If no time is displayed, the screen will show "--:--". Press the Power On/Off button to turn on your radio
and it will find a DAB clock radio stations. It may be necessary to relocate your radio to a position
giving better reception and carry out a scan to find stations as described in later sections.
IMPORTANT: The mains plug is used as the means of connecting the radio to the mains supply. The
mains socket used for the radio must remain accessible during normal use. In order to disconnect the
radio from the mains completely, the mains plug should be removed from the mains outlet completely.
5