Ivoclar Vivadent Programat CS Mode D'emploi page 53

Settings Display
"Ivoclar Vivadent
optimized
temperature control
function"
Selection of factory
settings
Important information
The user code (6725) is required for some settings.
5.5.2 Information
Short description
By pressing the 'Information' key (81), you can access the informa-
tion display (the latest information selected is being displayed). You
Only after entry of
can browse through the various information using the cursor keys
the STD code.
(79, 80). You can exit this display by hitting ESC (71) or one of the
Enables the deactiva-
program keys (82, 83, ...).
tion of the "Ivoclar
Vivadent optimized
temperature control
function"
Settings
With this setting, all
Serial number
values and para-
meters can be reset
to the factory
settings.
Attention:
All individual pro-
Software version
grams which have
been created and
saved will be deleted
with this function.
Furnace head
firing hours
Operating hours
furnace
Operating hours
vacuum pump
Latest start of
calibration program
Calibration value
Supply voltage
Error list
21
Display Short description
Serial number of the
furnace
Calibration value
660°C and 963°C
Shows the current
supply voltage
Enables the display
of the latest error
messages.