Siebert SX102 Série Manuel D'utilisation page 21

Block diagram
Depending on the version, the units show the following number of characters:
SX102-06/18/0x-00x/0B-K0 (character height 18 mm, 6 characters):
SX102-08/18/0x-00x/0B-K0 (character height 18 mm, 8 characters):
SX102-14/18/0x-00x/0B-K0 (character height 18 mm, 14 characters): C14...C1
SX102-08/30/0x-00x/0B-K0 (character height 30 mm, 8 characters):
The Profibus interface (9-pin D-Sub socket) has the following assignment:
Pin 1 2
Signal – –
Status indicators
The status indicators (LEDs) on the back of the unit have the following function:
PWR The Profibus interface is supplied with power.
BUS The unit is parameterized on the bus and recognized as participant.
DATA Short flashing: The information to be displayed is being updated.
Warning
Bus errors can cause damage to personal or material property. Please bear
in mind, that activating the menu units may cause a bus error.
BAL SX102 PFB M 1.00
3 4 5
B – GND
6 7 8
+ 5V – A
C6...C1
C8...C1
C8...C1
9
–
21