Panasonic AW-HS50E Mode D'emploi page 66

Appendix (glossary)
Word
Linear Key
Lum [Luminance]
Luminance Key
ME [Mix Effect]
Mix
Multi View Display
OSD [On Screen Display]
PinP [Picture in Picture]
PVW [Preview]
PGM [Programme Bus]
PST [Preset Bus]
Sat [Saturation]
SDI [Serial Digital Interface]
Self Key
Setup Data
Tally
Transition
Trimming
Up Converter
Wipe
The function which combines keys using monochrome key signals with gradations in
its outlines as a reference.
The brightness portion of the video signals.
The function which creates key signals based on the luminance (brightness)
information of the video signals to combine keys.
A video effect device which combines a number of video signals to create mix, wipe,
key and other video signals.
The picture-changing effect produced by overlapping one image with the next.
It is also referred to as "dissolve".
This function combines multiple materials and displays them on one screen.
PGM, PVW and the input material can be previewed at the same time on a single
screen.
This function enables settings to be performed on the menu screens which are
displayed in the monitor output.
This function combines a sub screen image with the background image.
The function for checking ahead of time the image which will be output after the next
transition. The image is output from the PVW system.
The bus which always carries the programme output signals.
The bus which carries the programme output signals after the next background
transition.
This refers to the intensity of the colour chrominance level of video signals.
The standard by which video signals in various SD and HD formats are transmitted
along a single coaxial cable.
A function that creates key signals from key fill signals for combining keys.
The memory in which the control panel statuses can be saved and recalled.
The button selection statuses as well as the border, colour and other setting
information can be saved in this memory.
The signal which outputs the programme output statuses of the input signals to an
external device. The LED that indicates the programme output status on the control
panel is also referred to as tally.
A function that switches from one image to another.
Wipe, mix and other effects are available for the images during switching.
This is the function that eliminates the unnecessary parts at the top, bottom, left
and/or right of the images which are combined using the PinP function.
This is the function that converts material in the SD format into the HD format which
yields a high resolution.
A video effect in which one image is gradually replaced by another as the boundary
between the two is moved using a preselected pattern.
65 (E)
Explanation