1. Basic operations
1-5. FTB (fade to black)
Pressing the FTB ON button initiates fade-out from the
programme image to a black screen or fade-in from a black
screen to the programme image for the transition duration
which has been set.
<Setting the transition duration>
[1] TIME/CBGD Menu
4. FTB Time
<Selecting the image>
[1] TIME/CBGD Menu
5. FTB Source
One of the following images can be selected to appear on
the screen when fading out.
FMEM1, FMEM2, CBGD, White, Black
The transition duration can also be changed by turning
the OSD/TIME dial while pressing the FTB ON button.
When the FTB ON button is held down, the duration
setting is displayed on the OSD menu so the setting can
now be changed while checking what is displayed.
1-6. Internal colour signals
These signals allow the colour of the background used by
the bus to be set.
CBGD Colour
[1] TIME/CBGD Menu
9. Set CBGD Col
Any of the following colours can be selected for the
background image.
White, Yellow, Cyan, Green, Magenta, Red, Blue, Black
Colour Adjust
[1] TIME/CBGD Menu
10. Adj CBGD Col
This item is used to adjust the hue (H), saturation (S) and
luminance (L) of the colour which has been set for the
background image.
21 (E)