Input/Output Signal Settings; Input Signal Settings - Panasonic AW-HS50E Mode D'emploi

2. Input/output signal settings

2-1. Input signal settings

The SDI IN 1 to SDI IN 4 connectors are the SDI signal input
connectors, and the DVI IN connector is the DVI-D signal
input connector.
A frame synchronizer is incorporated for each of the inputs
so that asynchronous video signals can be selected with no
accompanying shocks.
<List of settings by input signal>
Setting menu items and
sections in this manual
Input
Name
connector Mode
Type
2-1-1 2-1-2
SDI IN 1,
 
SDI IN 2
SDI IN 3,
 
SDI IN 4

DVI IN —
Setting menu items and
sections in this manual
Input
connector VPrc
2-1-6 2-1-7
SDI IN 1,

SDI IN 2
SDI IN 3,

SDI IN 4
DVI IN
—
: Can be set; —: cannot be set
To set the input signals, display the [10] Input Menu using
the OSD menu, and select the input signals.
Freeze
Name Freeze
Select
2-1-3 2-1-4 2-1-5
  
  
 
—
DVI-IN
DVI-IN
UC information
scaling
display
2-1-8 2-1-9
— — —

— —
 
—
The display is switched to a menu display such as the one
shown below by the input signals selected.
The menu title changes to "Input Menu/Input Connectors
(Material Names)".
The settings selected using the "4. Name Type" and
"5. Name" items described below are displayed in the
"(Material Names)" area.
SDI-IN1, SDI-IN2:
SDI-IN3, SDI-IN4:
DVI-IN:
The settings of each menu item will now be described.
26 (E)