Selecting The Bus Mode; Selecting The Transition Type; Manual Transitions - Panasonic AW-HS50E Mode D'emploi

Masquer les pouces Voir aussi pour AW-HS50E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 134
1. Basic operations

1-1-4. Selecting the bus mode

The bus mode can be set by the following menu operations.
[13] Operation Menu
5. Bus Mode
A/B:
When the slide lever is at side A, the signals selected by
the A bus are replaced PGM materials.
When the slide lever is at side B, the signals selected by
the B bus are replaced PGM materials.
PGM (A)/PST (B):
Using a flip-flop system, the signals selected by the A
bus are always replaced PGM materials, and the signals
selected by the B bus are always replaced PST materials.
PGM (B)/PST (A):
Using a flip-flop system, the signals selected by the B
bus are always replaced PGM materials, and the signals
selected by the A bus are always replaced PST materials.

1-1-5. Selecting the transition type

Use the MIX button and WIPE button to select the
background transition mode.

1-1-6. Manual transitions

Operate the slide lever to execute transitions manually.
If the slide lever is moved while an auto transition is
executed, operation will switch to manual as soon as the
position of the slide lever has gone beyond the amount of
the transition which has been executed.
The bus tally indicators on the left of the lever show the
programme output statuses.
When only indicator A is lit:
Only the A bus is output
When both indicators A and B are lit:
Transition underway
When only indicator B is lit:
Only the B bus is output
<Setting the slide lever function>
[13] Operation Menu
7. Slide Lever
Any of the following targets for which the transition is to be
executed can be set by operating the slide lever.
BKGD:
Background transition
KEY:
Key transition
PinP:
PinP transition
NoAsign: Transitions are not executed even when the slide
lever is operated.
5 (E)

Publicité

Table des Matières
loading

Table des Matières