Operation Menu Settings; Osd (On-Screen Display) Settings - Panasonic AW-HS50E Mode D'emploi

4. System settings

4-2. Operation menu settings

4-2-1. OSD (on-screen display) settings

The menu screens can be superimposed onto the images
output from the SDI OUT 2 connector and DVI OUT
connector, and displayed.
[13] Operation Menu
1. OSD OUT
Select the connector to be used for outputting the OSD
displays from the options listed below.
SDI-OUT2
DVI-OUT
SDI-OUT2+DVI-OUT
  The SDI OUT2+DVI-OUT option is selected when the
OSD ON button is pressed while the SHIFT button is held
down.
When this is done, "Auto" is selected as the following
menu setting.
[11] Output Menu
5. DVI-OUT:Size
[13] Operation Menu
2. OSD Size
The OSD size and position can be selected from the options
listed below.
FULL Full size of screen
Upper-Left As shown in the figure below, the menu
Upper-Right appears in one-fourth of the full size of
Lower-Right the screen, and it is positioned in one of
Lower-Left the four quadrants.
Upper-
Left
Lower-
Left
 If the frame of the OSD overlaps the multi view display
frames, the frame displays will be hidden.
[13] Operation Menu
3. OSD Back
On: A black background is displayed for the OSD.
Off: A black background is not displayed for the OSD.
42 (E)
Upper-
Right
Lower-
Right