Panasonic AW-HS50E Mode D'emploi page 19

1. Basic operations
 Trim Adjust1, Trim Adjust2 
[3] PinP Menu
7. Trim Adjust1
8. Trim Adjust2
The method of trimming the PinP image and the area to
be trimmed are set using the "7. Trim Adjust1" and "8. Trim
Adjust2" items.
<Mode settings>
Off:
The image is not trimmed.
4:3:
The image is automatically trimmed so that its aspect
ratio is 4:3.
Manual:
The image is trimmed in the area which has been set
using the "7. Trim Adjust1" and "8. Trim Adjust2" items.
<Area settings>
Set the values for left (L), top (T), right (R) and bottom (B)
of the trimming area.
Trimming area
PinP valid area
50
T
(Top) (40)
0
B
(Bottom) (-40)
-50
-50
(-40)
L
(Left)
PinP original size
0 50
(40)
R
(Right)
18 (E)
 Set To Preset 
[3] PinP Menu
9. Set To Preset
Up to four sets of PinP image settings can be registered in
the preset memories.
< Registering the settings in the preset memories>
Select 1, 2, 3 or 4, and press the OSD/TIME dial.
The status currently set is now registered in the selected
preset number.
< What can be registered in the preset memories>
 Shape used when combining the images
 Image position (X, Y)
 Image size
 Border width
 Border colour
 Soft effect amount
 Trimming setting
<Calling the preset memory settings>
What has been registered in the preset memories can be
called using the USER buttons.
  Before any settings are registered or recalled,
"PinP Preset" must be selected by operating the menu
item below and the settings must be assigned to the
USER buttons.
[12] USER/FMEM Menu
1. USER1